airVentDisplay
×
 x 

0 products
Wednesday, 26 June 2019 20:58

Brake Disc Temp Measurements mockup

3D printed an interation of the enclosure, soldered the components necessary for doing brake disc temperature measurements and made a first version of the sw necessary for streaming the temperature data over Bluetooth LE.


Need to find potting material to seal the electronics in the enclosure as well as threaded inserts for the enclosure to enable easy install of the sensor.

 

 

Did a test with my hot air solder device to get a feeling with the measurement of the temperatures. Used the adafruit BlueFruit app for Android to receive the measurements from my sensor. The sensor measures 16x4 tempeartures. For the test I did a map reduce, and took the avarage of the 4 temperatures to get 16x1 temperatures. In addition I calculated the overall average temperature (i.e. 17 values to transfer). For the test I transferred the 17 measurements over BLE with 50Hz. The results looks very promising...

 

 

 

airVent Display solutions

Discover the amazing amount of information available on the E46 CAN bus, made easily available via a touch screen embedded in the E46 air vent console.

 

FIND OUT MORE SHOP TODAY!

MK60 emulator solutions

Enable the MK60 CAN bus data stream in a non-standard E46 configuration, made available by a dedicated custom made MK60 emulator.

 

FIND OUT MORE SHOP TODAY!


TOP