airVentDisplay
×
 x 

0 products
Sunday, 14 January 2018 19:23

First in-car test airVent Display

Found finally a time slot to test the airVent Display in one of my cars. Had to make a cable harness for easy test of the prototypes before the test could begin.

Tried first in my e46 m3 based car, but the battery was flat (winter time...), so my e46 325ti had to serve as a test mule. The first test involed only testing with data coming with the main CAN data stream. Happy to see that all tested in the bench also worked in the car. Some minor tuning of the software due to hard-to-test-in-the-bench-issues had to be made...

 

 

 

A video from the test can be seen on Vimeo.

Media

in-car test of airVent Display

airVent Display solutions

Discover the amazing amount of information available on the E46 CAN bus, made easily available via a touch screen embedded in the E46 air vent console.

 

FIND OUT MORE SHOP TODAY!

MK60 emulator solutions

Enable the MK60 CAN bus data stream in a non-standard E46 configuration, made available by a dedicated custom made MK60 emulator.

 

FIND OUT MORE SHOP TODAY!


TOP