The modules transmits the measured data onto the CAN bus. Typically application is to attach one module for reading the brake pressures on the MK60 ABS as well as the oil pressure on the S54 engine and transmit the data by custom CAN messages. The brake pressure sensors are already on the MK60, but one need to install an oil pressure sensor in the spare input close to the oil pressure switch. For the gear box temp there will be one Analog2CAN module reading the temperature and transmit the data onto the CAN bus by a custom CAN messages. The same for the diff temperature.
Analog2CAN modules for reading pressure sensors (0-5V) and temperature sensor (RTD/PTC) are developed.